Why you should learn Go?

Go will be the server language of the future.” — Tobias Lütke, Shopify

In past couple of years, there is a rise of new programming language: Go or GoLang. Nothing makes a developer crazy than a new programming language, right? So, I started learning Go before 4 to 5 months and here I am going to tell you about why you should also learn this new language.

I am not going to teach you, how you can write “Hello World!!” in this article. There are lots of other articles online for that. I am going the explain current stage of computer hardware-software and why we need new language like Go? Because if there is no problems, then we don’t need solution, right?

Hardware limitations:

Moore’s law is failing.

First Pentium 4 processor with 3.0GHz clock speed was introduced back in 2004 by Intel. Today, my Mackbook Pro 2016 has the clock speed of 2.9GHz. So, nearly in one decade, there is no too much gain in the raw processing power. You can see the comparison of increasing the processing power with the time in below chart.


From the above chart yo can see that the single-thread performance and the frequency of the processor remained steady for almost a decade. If you are thinking that adding more transistor is the solution, than you are wrong. This is because at smaller scale some quantum properties starts to emerge (like tunneling and because it actually costs more to put more transistors (why?) and the number of transistors you can add per dollar starts to fall.

So, for the solution of above problem,

  • Manufacturers started adding more and more cores to the processors. Now a days we have quad-core and octa-core CPUs available.
  • We also introduced hyper threading.
  • Added more cache to the processors to increase the performance.

But above solutions has it’s limitations too. We cannot add more and more cache to the processor to increase performance as cache have physical limits: the bigger the cache, the slower it gets. Adding more core to the processor has its cost too. Also, that cannot scale to indefinitely. These multi-core processors can run multiple threads simultaneously and that brings concurrency to the picture. We’ll discuss it later.

So, if we cannot rely on the hardware improvements, the only way to go is more efficient software to increase the performance. But sadly, modern programming language are not much efficient.

“Modern processors are a like nitro fueled funny cars, they excel at the quarter mile. Unfortunately, modern programming languages are like Monte Carlo, they are full of twists and turns.” — David Ungar

Go has goroutines !!

As we discussed above, hardware manufacturers are adding more and more cores to the processors to increase the performance. All the data centers running on those processors and we should expect an increase in the number of cores in upcoming years. More to that, today’s applications using multiple micro-services for maintaining database connections, message queues and maintain caches. So, the software we develop and the programming languages should support concurrency easily and they should be scalable with increased number of cores.

But, most of the modern programming languages(like Java, Python etc.) are from the ’90s single threaded environment. That doesn’t mean they do not support multi-threading. Most of those programming languages supports multi-threading. But the real problem comes with concurrent execution and threading-locking, race conditions and deadlocks. Those things makes it hard to create a multi-threading application on those languages.

For an example, Creating new threads in Java is not memory efficient. As every thread consumes approx 1MB of the memory heap size and eventually if you start spinning thousands of threads, it will put tremendous pressure on the heap and will cause shut down due to out of memory. Also, if you want to communicate between two or more threads, it’s very difficult.

On the other hand, Go was released in 2009 when multi-core processors were already available. That’s why GoLang is built with keeping concurrency in mind. Go has goroutines instead of threads. They consume almost 2KB memory from the heap and you can spin millions of goroutines at any time.


Other benefits are :

  • Goroutines have growable segmented stacks. That means they will use more memory only when needed.
  • Goroutines have a faster startup time than threads.
  • Goroutines come with built-in primitives to communicate safely between themselves (channels).
  • Goroutines allow you to avoid having to resort to mutex locking when sharing data structures.
  • Also, goroutines and OS thread are not 1:1 mapping. A single goroutine can run on multiple threads. Goroutines are multiplexed onto a small number of OS threads.

You can see Rob Pike’s excellent talk concurrency is not parallelism to get more deep understanding on this.

All the above points, make Go very powerful to handle concurrency like Java, C and C++ while keeping concurrency code straight and beautiful like Earlang.


Go runs directly on underlying hardware.

One most considerable benefit of using C, C++ is their performance over other modern higher level languages like Java/Python. Because C/C++ are compiled and not interpreted.

Processors understand binaries. Generally, when you build an application using Java or other JVM-based languages when you compile your project, it compiles the human readable code to byte-code which can be understood by JVM or other virtual machines that run on top of underlying OS. While execution, those VM interprets those bytecodes and convert them to binaries that can be understood by processors.

Execution on VM based languages

While on the other side, C, C++ does not execute on VMs and that removes one step from the execution cycle and increases the performance. It directly compiles the human readable code to binaries.

Execution on non-VM based languages

But, freeing and allocating variable in those languages is a huge pain. While most of the programming languages handle object allocation and removing using Garbage Collector or Reference Counting algorithms.

Go brings best of both the worlds. Unlike lower level languages like C/C++, Go is compiled language. That means performance is almost nearer to lower level languages. It also uses garbage collection to allocation and removal of the object. So, more malloc() and free() statements!!! Cool!!!

Code written in Go is easy to maintain.

Let me tell you one thing. Go does not have crazy programming syntax unlike other languages. It has very neat and clean syntax.

The designers of the Go at google had this thing in mind when creating the language. As google has the very large code base and thousands of developers were working on that same codebase, code should be simple to understand to other developers and one segment of code should have minimum side effects on another segment of the code. That will make code easily maintainable and easy to modify.

Go intentionally leaves out many features of many features of modern OOP languages.

  • No classes. Every thing is divided into packages only. Go has only structs instead of classes.
  • Does not support inheritance. That will make code easy to modify. In other languages like Java/Python, if the class ABC inherits class XYZ and you make some changes in class XYZ, then that may produce some side effects in other classes that inherit XYZ. By removing inheritance, Go makes it easy to understand the code also (as there is no super class to look at while looking at a piece of code).
  • No have constructors.
  • No annotations.
  • No generics.
  • No exceptions.

Above changes make Go very different from other languages and it makes programming in Go different than other. You may not like some of the points from above. But, it is not like you can not code without above features. All you have to do is write 2–3 more lines. But on the positive side, it will make your code cleaner and add more clarity to your code.

Code fun.PNG

Above graph displays that Go is almost as efficient as C/C++, while keeping the code syntax simple as Ruby, Python and other languages. That is a win-win situation for both humans and processors!!!

Unlike other new languages like Swift, it’s syntax of Go is very stable. It remained same since the initial public release 1.0, back in year 2012. That makes it backward compatible.

Go is backed by Google.

  • I know this is not any direct technical advantage. But, Go is designed and supported by Google. Google has one of the largest cloud infrastructures in the world and it is scaled massively. Go is designed by Google to solve their problems of supporting scalability and effectiveness. Those are the same issues you will face while creating your own servers.
  • More to that Go is also used by some big companies like Adobe, BBC, IBM, Intel and even Medium.(Source: https://github.com/golang/go/wiki/GoUsers)


  • Even though Go is very different than other object-oriented languages, but it is still the same beast. Go provides you high performance like C/C++, super efficient concurrency handling like Java and fun to code like Python/Perl.
  • If you don’t have any plans to learn Go, I will still say hardware limit puts pressure to us, software developers to write super efficient code. The developer needs to understand the hardware and make the programs optimize accordingly. The optimized software can run on cheaper and slower hardware (like IOT devices) and overall batter impact on end user experience.

~If you liked the article, click the 💚 below so more people can see it! Also, you can follow me on by clicking follow button below, so you get updates regarding future articles on Go!!~

follow me on twitter.jpg